"Sweet" by Linda Thompson

"Sweet"

Green Tara Products Used

Roses - In large & small Pinks

Gardenias - In Ivory and Pink

Lace - Glimmer Mist used to add colour

Cherry Blossoms - In cream, some left plain others sprayed with blue glimmer

Leaves - Small copper

Organza Rosette Ribbon - In Pink

Crinkle Satin Edged Ribbon - In Pink

Calla Lillies - Pink

Extra's - Basic Grey papers, Various chipboard, Glimmer Mist and Glam

 Glimmer Glam in Chanderlier has been painted onto the flowers and leaves to give them a glitter affect, Glimmer Mist used on ribbon to slightly alter the colour.

Bye for now.   Linda

"Fairy Princess" by Linda Thompson

"Fairy Princess"

Green Tara Products Used

Cherry Blossoms - In Peach, Violet, Violet/White & Sea Green

Gardenias - In Purple & Lilac

Organza Rosette Ribbon - In Lavender

Lace - Glimmer Mist used to add colour

Extras - Kaiser papers, various chipboard, Doilies, Flower Soft.

Lace has been sprayed with a dark purple glimmer to alter the colour, all flowers have been painted with glimmer glam to ad a touch of glitter.

Thanks for stopping by &  I hope you like these two layouts. Until next time.    Linda x

Childrens Party InvitationsBy Amanda Kitchen

Hello everyone. Today I would like to share some childrens party invitations with you which I made using the lovely Green Tara products. I hope this gives you a few ideas how to dress up simple little invitations with the use of a few gorgeous ribbons & trims.

Green Tara Products Used

Pretty & Frilly   Card No.1.
25mm organza stripe in hot pink
10mm loop n tassel in berry
3cm satin bow in dark pink


Dragonfly Groove   Card No.2.
6mm opal sequin trim in pink opal
22m vertical stripe ribbon in pink/lime
12cm dragonfly silver / acrylic diamonte cut

Sweet as Candy   Card No.3.
22mm vertical stripe ribbon in pastel pink
2.5 daisy lace - flower cut out.



Kind regards,

Amanda

Amanda Kitchen
dizzi dezine
www.dizzidezine.com.au

Trinket Box by Mistra Hoolahan

Hi everyone!

This weekend I  turned a simple little balsa wood box into this sweet trinket box for us here at Green Tara...

 I was dying to see how well the banana fibre papers would go used like tissue for covering items... it was so easy to work with!  I adore the fibres showing through, giving it such wonderful texture.  I used Inkssentials Glue'n'Seal to adhere the banana fibre paper and while still wet applied some Tim Holtz stains and blended them through with more Glue'n'Seal. 

I cut up some of the Silver Stems to pop into the ribbon bow, they add such a delicate sparkle to everything

I love the little metal embellishments Green Tara stock, they are so easily transformed if the silver isn't working for your project.  Just give them a thin coat of acrylic paint or gesso, then when dry add another coat and then add some stains for more colour.

The Silk Flowers with Swarovski Crystals have become a favourite of mine, they are simply so sweet with that gorgeous sparkly center.

Green Tara Products used:

Silk Flowers with Swarovski Crystals - 3cm

Silk Flowers with Swarovski Crystals - 2cm

Natural Banana Fibre Paper

Metal Embellishments - Hearts - 2.5cm

Silver Acrylic Flower Spray

Crinkle Satin Edged Organza - Dusky Pink

Until next time, take care,

Mis xo

Happiness From AboveBy Geraldine Pasinati

Hi everyone, Today I'm sharing a sweet, pretty and very feminine layout I created for my daughter Mackenna. I wanted to show how well different styles of Green Tara flowers can be combined and look really stunning together. 

For this layout I have used Green Tara flowers, stems, and lace and teamed it with Pion Designs Papers to create a  soft 'Vintage' layout that any little princess would love.

Thank you for visiting the Blog. Stay a while and I hope you are inspired by all the projects the amazing Design Team have here for you to see. Till next time.      Geraldine.

  

Products Used :

Gardenia,in  pink and white.

White Lace.

Silver teardrop spray. XB30526

Silver pearl spray XP0631

Paper leaves.

Aster Flowers- Batik Vintage.

Cherry Blossoms

Roses.

The Eyes......by Di Garling

Well here I am again. Today I would like to share this layout with you that I made recently. Of course there are lots of beautiful Green Tara flowers,  riboons & lace here. I have used all white flowers again & Glimmermisted them to the colours I needed. This seems to be becoming a habbit with me lately. If you don't have Glimmermist you could use inks or paints even. All of these flowers on the entire layout cost less that what it would cost me to buy one packet of some of the well know brands!! Good value I say. I have also used some beautiful Green Tara Lace, Lime Green Bud N Bow Trim & a gorgeous Lime Green Tara ribbon which I have simply tied in a bow. I have also inserted some of the lace along the top edge of the page in between the layers.

In this close up picture you can see how well the flowers colour up. On the green flowers I have also edged them in some "Diamond Dust" for a touch of glam. One the blue roses  which were also misted from white to blue, I have splashed a little "Irredescent Medium" on to add a little shimmer.

In this close up you can see how beautiful this lace & Bud N Bow Trim looks, also this yummy bow tied with the Green Tara Satin Edged Organza Ribbon. Super feminine.
Well thanks again for stopping by, until next time.     Cheers Di  xo

Products Used

Lace / White  CODE: L2902OW

Bud N Bow Trim / Lime  CODE: RB6761Ol

Satin Edge Organza Ribbon / Lime 23mm CODE: RB16Li

3 layers Gardenias / White CODE: FDV054Wh

Glimmermisted in Lime

3cm Roses / White  CODE: FDR024Wh

Glimmermisted in Blue & Lime

Cherry Blossoms / White  CODE: FLC22Wh

1.5cm Mini Flower CODE: FDVLi s /Lime

Making Tendrils for Flowers by Di Garling

Hi everyone. Today I would like to share a little tip that I use all the time with my flower clusters, just to add a touch of class. A lot of you probobly already do this, but for those of you that don't, I think you will like this extra little touch.

Firstly take a Green Tara Rose, these usually come with this little green wire attached & I always use my Awl. If you don't have one of these tools a skewer or something similar will do.

 Next I hold the end of the wire with my thumb on the spike of my tool & just start rotating so as to curl the wire around the Awl.

Now just slide your tool out of the spiral & hey presto, all done. There you have a sweet little tendril hanging from your rosebud. Now all you have to do is glue the rose onto your layout. How easy was that???

If you look closely at this picture (click on picture to enlarge it) you will see three little tendrils spilling out from around my flower cluster. It just adds a touch of realism to your flowers. Thanks for stopping by. Until next time.  Cheers Di  xo

"Butterfly Kisses" by Jan Rankine

Hi everyone - today I thought I'd share this page with you - great papers, fabulous pic and naturally lots of Green Tara flowers and ribbons.

You can find any flower in any colour to match any project you might be doing.

 Their fabulous range of ribbons makes it easy to co-ordinate all your projects
Products used:

23mm Satin Edged Organza Aqua 25m
CODE: RB16Aq

10m Bud n Bow 16mm, Ivory
CODE: RB6761Iv

9mm Twisted Organza Pearl Ivory 20m Roll
CODE: RB6715Iv

**NEW** 50 3 Layer Gardenia Peach
CODE: FDV054Pe

Cherry Blossoms Cream
CODE: FLC22C

Cherry Blossoms Peach/Cream
CODE: FLC22PeC

1cm Mini Rosebuds Ivory
CODE: FDV025Iv

**NEW** 1.5cm Roses Turquoise
CODE: FDR003Tu

Thanks for dropping by - Luv Jan xx

Valentines Day by Vicky Alberto

I had this layout idea with layered hearts and a lace border in my head but I couldn't find the right family pictures. So... I made it into a display instead to put on my fireplace mantle for February - love month :) The beautiful papers and vintage images I used are from Pion Design and all of the embellishments are Green Tara products (flowers, lace and sprays). I made the flowers by simply layering Green Tara white petals and silk flowers (with crystal centers!). Oh I just love those crystal flowers and the pearl sprays are glorious too. Thanks for taking the time to view my project today!
Vicky

Green Tara Products:

1cm Off White Lace
CODE: L3077OW

2.8cm White Lace
CODE: L2901W

3cm White Roses
CODE: FDR024Wh

2cm Rose Cream
CODE: FDR009C

Silk Flowers with Swarovski Crystal Centres Ivory
CODE: SDIvL

5cm Petals, White
CODE: PFLP02

6cm Petals, White
CODE: 022Wh

20cm Silver/Pearl Spray
CODE: XP0616

"Dream" by Vicky Alberto

The photo is of my son a few years ago asleep on the couch. I just can't seem to do a boy layout without flowers, LOL. The papers are from the Pion Design and I used some Green Tara white petals, cream roses, suede leaves, and apple blossoms, as well as some of their divine lace trim. I soooooo love the lace - thick and gorgeous! Thanks for stopping by to take a peek today!
Vicky

Green Tara Products:

3cm Ivory Roses
CODE: FDR024Iv

10cm Off White
CODE: L3042OW

Cherry Blossoms Cream
CODE: FLC22C

10cm petals
CODE: FDS023Wh

Suede Leaf Olive
CODE: RBXLOl

Tissue Box By JJ Sobey

Hi everyone, today I want to show you a Tissue Box I made recently.
The box was misted with several glimmer mists and then I added the Green Tara flowers.The colours are (Gardenia in White & White Apple Blossoms) coloured with Indian Summer and Hawaiian Hibiscus glimmer glaze. The leaves were cut from one of the Green Tara handmade papers, which take mists just beautifully!
I love this jute ribbon. It's perfect for autumn coloured projects, as well as masculine pages & cards.
Product Used:
Jute Ribbon - 9mm Natural Jute Ribbon
Handmade Paper (for leaves) - 3D Natural
Flowers - Gardenia White, White Apple Blossoms

Thanks for stopping by.
JJ Sobey